90672258_Colad_Plastic-repair-black-30sec_1.jpg

2K Plastic Repair 30 Seconds

90672258

Specifications

Powerful 2-component (2K-PU) plastic adhesive. For bonding and repairing of plastic parts. Cartridge of 50 ml with 2 mixing tips. Per piece.

30 Seconds Super-Fast curing. Powerful 2-component (2K-PU) plastic adhesive  

For all-purpose structural bonding of plastic parts. Resistant to exposure to elevated temperature, moisture, fuel, many solvents and chemicals. Specially designed for small, quick, durable bonding and repair jobs.  

Benefits of 2K Plastic Repair 30 Seconds

  • Sandable in 5 minutes!  
  • Excellent adhesion on most plastics
  • No smell
  • Fast cure
  • Superior ambient cure response
  • Excellent gap filling properties
  • Cure response is NOT depending on the thickness of the applied adhesive as with most other 
  • Polyurethane systems
  • Easy to sand
  • Stays flexible even under cooler conditions

Technical features of 2K Plastic Repair 30 Seconds

  • Colour: Black 
  • Packing: 50 ml 
  • Packing unit: 6 pieces per box
  • Store: Cool and dry, between +15°C and +32°C;  (After opening leave the used mixer tip attached  to ensure sealing from humidity, remainder can still be used) 
  • Shelf life: 24 months 
  • Technical data
    - Open time*: 30 seconds
    - Handling time*: 2.5 minutes
    - Sanding time*: 5 minutes
    - Paint time*: 5 minutes (* at 23°C) 
    - Cure Ambient or heat accelerated cure (max 120°C)
    - Optimum Bondline Thickness 0.5 mm to 1.5 mm 
    - Maximum Bondline Thickness ± 5 mm 
    - Paint Bake max 150°C 
    - Tensile strength, MPa @ 23°C 24.8 (ASTM D-638) 
    - Young's Modulus, MPa @ 23ºC 1775 (ASTM D-638) 
    - Elongation, % 46 (ASTM D-638) 
    - Shrinkage, % <1.0 (ASTM C-733) 

Application of 2K Plastic Repair 30 Seconds

  • Attach the Mixer Tip on top
  • Press out some product (± 25 – 50 mm) To make sure that the product is properly mixed
  • Pull the trigger of the 2K Manual Gun at a constant force for an even layer of adhesive
  • Make sure that the top of the Mixer Tip is always in the product, this prevents air from enclosing in the adhesive. Which will form air bubbles when applied
  • When cured (read technical information) sand and refinish when needed
  • After finishing leave the mixer tip in place
  • When using again, remove the mixer tip. Carefully clean the cartridge nozzle. (The products in the two chambers must be cleanly separated.) Attach a new mixer tip and start a new job 
  • Paintability:
    - Paintable with the most car repair 1K and 2K paints. Due to the diversity of varnishes and paints we recommend preliminary tests

Safety data of 2K Plastic Repair 30 Seconds

Contact

Contact Form

Thanks for contacting us! We will get in touch with you shortly.