Spray Booth Walls

Protect your spray booth walls from overspray, dust and dirt for a clean work environment.

Film4Booth

Protect your spray booth walls for 1 year, using this 4-layered protection film! Layer has to be removed after 250 booth cycles or 3 months. To remove a layer, peel the top layer off to expose fresh film and re-tape the edges. Roll of 90 cm x 84 m (including 6 rolls of tape).

  • Self-adhesive
  • Transparent
  • Can be applied over lights and windows
  • Treated with paint adhesion

Film4Booth is suitable to be used on the walls of a spray booth, and is tested / certified by norm EN 60079-0 : 2011 which specifies the general requirements of construction, testing and marking of electrical equipment and Ex Components intended for use in Explosive atmospheres.

Film4Booth can be used in accordance with ATEX normative 2014/34/EU (replacement of the old ATEX norm 94/9/CE) & is suitable for the following zones & explosion groups, this was tested by norm EN 60079-0:2011).

Go to product

Film4Booth Edge Tape

To be used in combination with Colad Film4Booth. During applying or removing a layer of Colad Film4Booth the Colad Edge-Tape is applied on the edges of the film or parts where there are difficulties applying Colad Film4Booth properly.
Go to product

Film4Booth Foil Dispenser

The application of Fim4Booth can be a heavy job. Because of the unique 4-layer structure, the roll of film is quite heavy. With the Colad Film4Booth Dispenser you are able to apply Film4Booth in an very fast and easy way. Simply install the Film4Booth roll on the dispenser from the top and start applying the foil to the spray booth walls.

No need for carrying the Film4Booth roll and dispenser through the spray booth anymore! The two solid wheels and easy to add-on handle bar make the  dispenser manoeuvrable on any surface (including grid floors). After use, remove the handle bar to save storage space.

Go to product

Film4Booth Applicator

Foil Applicator for quick and easy application of Colad Film4Booth against the Spray Booth walls.

Go to product

Booth Coating

This coating for spray booths walls is ready to apply by spray gun (1.8, 2.0). A different method for masking a spray booth. Protects the walls from overspray by applying a single layer of booth coating, Booth coating forms a strong and transparent dry film. Remove it with warm water or high pressure spray gun. 5L
Go to product

Aqua Strippable Coating

Strippable coating for masking spray booths walls. Apply by spray gun, brush or paint roller. Is an alternative to Booth coating or Antidust for the protection of the walls from overspray and dirt. Remove it by peeling of the film from the wall. 10L
Go to product

Antidust

Protect your spray booth walls with this adhesive lacquer and reduce cleaning time.

  • Ready to apply by spray gun (1.8, 2.0), brush and/or paint roller
  • Makes dirt and spray dust stick to the surface of the spray booth walls
  • Transparent, so no reduction of light or negative effect on colour judgment
  • Simply remove with warm water or high pressure spray gun
  • Silicone free
  • Suitable for 10-12 m2 per L
  • In a can.
Go to product

Contact form

Sign up for our newsletter